TX-22 FRD Kit
The TX-22 Active Reset Conversion fits the TX22, TX22C, and the TX22 Competition/T.O.R.O. It brings active reset operation to Taurus’s rimfire without ch…
- Lifetime Warranty on All Products
- Ships Within 48 Hours
- In Stock Guaranteed
Fit question? Email team@copperheadsafety.com or use the contact page with your trigger, BCG and caliber. We answer during business hours, Mon–Fri.
The TX-22 Active Reset Conversion fits the TX22, TX22C, and the TX22 Competition/T.O.R.O. It brings active reset operation to Taurus’s rimfire without chewing up the pistol to get there. On this platform the conversion part rides against the striker channel, so we put a 316 stainless plate over that contact zone and a carbon fiber nylon insert where the factory liner sat.
Product Features
- 316 Stainless Steel Interaction Plate — sits over the spot where the conversion part contacts the striker channel, so the steel takes the wear instead of your pistol
- Carbon Fiber Nylon Striker Channel Insert — drops in where the factory liner sat, cut to fit the conversion part rather than the OEM disconnector
- Striker Channel Liner Protection — the factory liner is soft polymer, and an unprotected conversion part wears straight through it. The plate and insert keep your pistol serviceable if you ever put it back to stock
- Two-Position Operation — safe or active reset fire, with nothing in between for your thumb to bump into
- Broad Platform Compatibility — fits the TX22, TX22C, and TX22 Competition/T.O.R.O variants
- Full Warranty Support — send us a defective part and we replace it at no charge, same as everything else we sell
- Personalized Customer Service — email us before you order or after you install, and you get a person who has built this kit
- 316 Stainless Steel
- Carbon Fiber Nylon
- 2-Position
- TX22 / TX22C / Competition / T.O.R.O
- Striker Channel Protection
- Full Warranty
Kit Contents & Installation
- Replaces Factory Disconnector — the conversion part takes the place of the OEM disconnector in the active reset mechanism. Set the factory disconnector aside; it stays out of the gun.
- Replaces Factory Striker Channel Liner — pull the original liner and drop the carbon fiber nylon insert in its place. The 316 stainless plate goes over the contact zone to carry the wear.
- Some Part Modification May Be Required — a few pistols need light fitting. Work through the included documentation, and email us before you cut anything if something does not look right.
Tuning & Suppressor Use
22LR runs on a narrow margin. A change in ammunition, velocity, or operating conditions moves cycling one way or the other, and that comes with the cartridge rather than the kit.
Running your TX22 suppressed or on subsonics may call for an aftermarket recoil spring to keep the reset consistent. Change what the pistol is working against and the supporting parts usually need to move with it. Email us your setup and we will tell you where to start.
Do not stake your life on a 22LR. Rimfire priming varies round to round, and the cartridge is fussier about ammunition than any centerfire you own. No active reset kit, ours included, fixes that. Buy this one for range use, and understand and accept the tradeoff before you check out.
Firearm Functionality
This product, when properly installed and left unmodified, is designed and intended solely for lawful semi-automatic operation. It is not capable of automatic fire, nor is it readily convertible to enable automatic or burst-fire operation. The TX-22 FRD Conversion actively resets the trigger, producing one discharge per individual trigger pull, in full compliance with applicable federal firearm law. End users are responsible for understanding and complying with all state and local regulations applicable to their jurisdiction.
Intellectual Property
This product incorporates design principles consistent with those recognized as lawful in prior judicial and regulatory determinations. It does not use, reproduce, or infringe upon any patented, copyrighted, or otherwise protected intellectual property belonging to any third party.
Inquiries
Copperhead Safety LLC is committed to transparency and good-faith communication. Any individual or entity with questions or concerns regarding the design, function, or legality of our products is encouraged to contact us prior to pursuing legal action.
Contact: admin@copperheadsafety.com
Reviews
No reviews yet. Run one and tell us how it went.
